Thermador Microwave

Thermador MB30WP

Model # MB30WP

The MB30WP is Thermador’s 30-inch Professional-collection built-in microwave, identified on its own product page as a drop-down door design with a 1.6 cu. ft. cavity and 1750-watt output on a standard 120V/15A circuit. It uses the same CookSmart auto-program set and Home Connect Wi-Fi platform as the rest of Thermador’s current built-in microwave line, and it requires a cutout of roughly 19-1/4″ high by 28-1/2″ wide by 19-1/4″ deep.

Most service calls on this generation of Thermador built-in microwaves trace back to the door mechanism, the touch control panel, or the turntable drive rather than the magnetron itself. A drop-down door that doesn’t latch flush can leave the interlock switch unsatisfied, and a control panel exposed to steam or condensation is a documented cause of keypad problems. When a numeric error code appears, Thermador’s own support guidance is to note the exact code, cut power at the breaker, and report that code when requesting service.

Key Features

  • 30-inch built-in drop-down door microwave from Thermador's Professional collection, with a bold touchscreen display
  • 1.6 cu. ft. cavity, 1750-watt microwave output on a 120V/15A circuit, cutout roughly 19-1/4" x 28-1/2" x 19-1/4" (H x W x D)
  • Home Connect Wi-Fi control, CookSmart auto-programs, and 10 dedicated microwave programs (from melting butter to softening ice cream)

Most Common Issues on This Model

01

Drop-down door hinge wear or misalignment can keep the door switch from sensing a full seal, so the unit won't start

02

Touch/keypad controls can stop responding after condensation gets into the control panel

03

Turntable motor, coupler, or roller-ring wear causes uneven heating or a turntable that won't turn

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

Book Your Repair Today

Same-day & next-day appointments · No hidden fees · Technicians trained on these appliances

or call (844) 452-4172 now

FAQ

Thermador MB30WP FAQ

Per Thermador's own error-code guidance, a general "E" plus a number indicates a malfunction. Write down the exact code, disconnect the microwave at the breaker, and reference that code when you call for service.

Condensation on the keypad is a documented cause of touch-control problems on Thermador built-in microwaves. Wipe the panel dry with a dry cloth, cut power at the breaker, wait about 10 seconds, then restore power.

Need a repair? We're ready to help. Call Now
Call Us Schedule