The T36IT800NP is the panel-ready French-door bottom freezer of the 800-generation Freedom lineup, listed at 454 lbs net. Two custom panels on the upper doors and one on the freezer drawer make alignment part of almost every visit.
French doors bring one part the 2-door models do not have: the hinged mullion flap that seals the gap between the doors. If it sticks, one door will not seal and frost or warm spots follow. Thermador’s own troubleshooting also names a jammed sensor arm as a reason the ice maker stops, which is quick to check.
Key Features
- 36-inch panel-ready French-door bottom freezer, 20 cu. ft. gross
- 6 fresh-food door bins including 2 gallon bins
- Ice maker in the freezer drawer, humidity-control drawer
- 454 lbs net; 84 x 35 3/4 x 24 in. overall
Most Common Issues on This Model
French doors not lining up after custom panels were installed
Center mullion flap sticking so the doors do not seal
Freezer drawer frosting from a misaligned drawer front
Ice maker stopped by a full-bin sensor arm stuck in the up position