What E07 Means
Not in Thermador owner literature. Two independent repair references give E07 as a freezer evaporator sensor problem. That sensor tells the control when the defrost cycle has cleared the coil, so its failure usually shows up as frost buildup.
Common Causes of E07
- Evaporator sensor open or shorted
- Sensor clip loose on the evaporator
- Wiring damage behind the evaporator cover
🔧 One Safe Check You Can Try
Power-reset the unit and look through the freezer for heavy frost on the rear panel or reduced airflow. Note whether the code appeared with frost, since that points to a defrost-related cause.
⚠ Why You Shouldn't Go Further Than That
- The evaporator sensor sits on the coil behind the rear cover, so the coil has to be defrosted and the cover removed to test it.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.